There aren’t many worse home repair projects than experiencing a malfunctioning furnace, but the hard truth is that everyone goes through furnace issues every now and again.
Your home’s heating system is invaluable for your comfort during the winter months, and regions like northern Utah need to pay extra close attention to their furnaces.
We’ve partnered up with the furnace repair lehi ut experts at Beehive Heating & Air to develop this list of the 10 most common furnace repair projects that occur throughout northern Utah, so take it from the HVAC pros in that the following issues are what you should be on the lookout for!
Thermostat Malfunctions
A very common furnace issue is when homeowners are experiencing thermostat malfunctions, and one common red flag of this issue is when your furnace’s fan is constantly running.
This is a troubling situation because it’ll ruin your furnace’s efficiency, so be sure to check your system’s settings and get professional help when your thermostat isn’t working as it’s supposed to.
Clogged & Dirty Filters
Clogged or dirty HVAC filters can drastically reduce your furnace’s overall efficiency and functionality, and in some scenarios, dirty filters can even lead to limit switch damages.
This is one of many reasons why it’s so important to check your system’s filters at least every couple of months, and sometimes even more frequently during particularly cold winters!
Weak, Flickering or Strangely Colored Pilot Light
Furnace functionality often derives upon pilot lights, so it’s incredibly important to take any flickering or strange coloring seriously. These types of pilot light issues can be indicative of carbon monoxide leaks, and this type of furnace repair is never a DIY project due to serious health and safety hazards!
Cracked Heat Exchangers
This is usually a pretty expensive furnace repair project, because most cracked heat exchangers will require a full component replacement.
Some ways to avoid cracking your heating system’s heat exchanger is to keep up with your HVAC filter replacements and not overheat your property.
Frayed or Malfunctioning Blower Belt
Your furnace’s fan will run properly due to the motor’s blower belt, and it’s normal for blower belts to become frayed or break after long periods of usage.
This type of repair project will often have high-pitched squealing sound symptoms that indicate how it’s time to get professional help. The good news is that replacing your system’s blower belt will get your motor back to an optimal performance.
Overly Frequent Cycling
If your furnace is cycling too frequently, it could be connected to many different HVAC issues. Some of these issues include improper airflow, clogged filters, or running your furnace at dangerous settings.
This type of furnace repair issue typically leads to abnormally high utility bills, so quickly addressing this project will benefit both your home and your wallet!
Limit Switch Repairs
When your system’s limit switch is malfunctioning, you’ll likely notice symptoms like continual blowing when your furnace shouldn’t be doing so.
This is never a DIY project, so you’ll require the assistance of an HVAC technician when you need to replace this vital component.
Furnace Not Blowing Out Air
There are a few different causes for this type of furnace repair project. The most common issue is that your blower has become clogged with debris, so this is something that you could possibly recognize through a DIY inspection.
You should also be on the lookout for a flashing light located near your system’s blower, because if this light is flashing red, it means that you’re undoubtedly going to require an HVAC technician to check things out on your behalf.
Worn Down Ball Bearings
It’s possible for your furnace’s ball bearings to get worn down over time, which is problematic for your motor’s overall functionality.
If you’re hearing any type of scraping sounds coming from your furnace, it could mean that you’re dealing with this particular issue. The only thing that a homeowner can do in this scenario is reach out to an experienced HVAC team for a professional repair appointment.
Pinging or Rattling Sounds
If you’re hearing any type of rattling, pinging or popping sounds coming from your furnace, it could be related to a variety of different dilemmas.
Rattling sounds are often connected to loose components and panels within your furnace, which will need to be retightened. Popping or pinging sounds are often connected to ductwork issues, which will require a comprehensive inspection and cleaning.
Reach Out To Beehive Heating & Air When You Need a Furnace Repair in Lehi UT!
There are many different issues that could lead to a furnace repair appointment, and the above list is just a quick glimpse into what could potentially happen to your property’s heating system.
You can learn more about furnace repair warning signs and causes when you go to the hyperlink located at the top of this page and speak directly with the Lehi UT HVAC experts over at Beehive Heating & Air!
